Pearson’s CS50-UG case sealer is optimized for boxes as small as 5in x 3.5in x 3.75in and reliably seals up to 50 cases per minute. The machine offers the optional capability of running tall, unstable and odd-size cases. A convenient bypass option eliminates the need for additional conveying when pre-sealed boxes or HSCs are introduced into the line. Advanced features such as high-visibility machine status lighting, non-contact interlocks, CAT-3 Safety Circuits, an easily accessible grace port, and an auxiliary operator station are standard on the machine.
A built-in metering stop creates gaps between cases without the need to adjust infeed conveyor speed for each case.
Servo-controlled trailing flap kicker increases speed, component longevity and reduces expensive air consumption by replacing air cylinders.
Spring loaded synchronous compensating side belts and squaring wheels ensure cases remain square throughout the closing and sealing process.
Overhead compression belt guarantee a secure glue bond prior to the case exiting the machine.
Machine offers optional capability of reliably running tall, unstable and odd-size cases.
Sensors detect fail-to apply, fail-to-cut and low tape situation.
Fast changeovers are supported by the industry’s most advanced HMI with an uncluttered design, intuitive navigation, interactive changeover and fault-recovery guides, live sensor maps, and advanced maintenance features. Scales, pointers and quick release handles ensure additional tools are not necessary. Trained technicians can complete a changeover in under 4min.
No need to build by-pass conveyors when running cases not requiring sealing.
Dual channel safety circuit maintains integrity of safety features in case of single component failure.
Eliminates misalignment of guard door interlocks which prevents problems common to keyed interlocks.
A standard four-light LED beacon and multi-color interior machine lighting provides high-visibility of machine status.
Grace ports provide convenient communication access and 110V convenience outlet at the outside of the machine’s electrical cabinet.
An auxiliary operator station enables machine control on both sides of the conveyor.
Allows Pearson’s support team on-demand access to the equipment’s PLC and HMI through a secure VPN connection via an eWON router (ISECOM STAR and ISO27001 certified) to support emergency troubleshooting and reduce on-site visits.
A built-in metering stop creates gaps between cases without the need to adjust infeed conveyor speed for each case.
Servo-controlled trailing flap kicker increases speed, component longevity and reduces expensive air consumption by replacing air cylinders.
Spring loaded synchronous compensating side belts and squaring wheels ensure cases remain square throughout the closing and sealing process.
Overhead compression belt guarantee a secure glue bond prior to the case exiting the machine.
Machine offers optional capability of reliably running tall, unstable and odd-size cases.
Sensors detect fail-to apply, fail-to-cut and low tape situation.
Fast changeovers are supported by the industry’s most advanced HMI with an uncluttered design, intuitive navigation, interactive changeover and fault-recovery guides, live sensor maps, and advanced maintenance features. Scales, pointers and quick release handles ensure additional tools are not necessary. Trained technicians can complete a changeover in under 4min.
No need to build by-pass conveyors when running cases not requiring sealing.
Dual channel safety circuit maintains integrity of safety features in case of single component failure.
Eliminates misalignment of guard door interlocks which prevents problems common to keyed interlocks.
A standard four-light LED beacon and multi-color interior machine lighting provides high-visibility of machine status.
Grace ports provide convenient communication access and 110V convenience outlet at the outside of the machine’s electrical cabinet.
An auxiliary operator station enables machine control on both sides of the conveyor.
Allows Pearson’s support team on-demand access to the equipment’s PLC and HMI through a secure VPN connection via an eWON router (ISECOM STAR and ISO27001 certified) to support emergency troubleshooting and reduce on-site visits.
Manual, supported by HMI graphical guided instructions and changeover map, scales, pointers, and quick release handles
4 min (estimate for trained technician)
0.314 SCF/Cycle
32.4 Amps
CSSC
RSC
Ultra-small Case Sizes
Air conditioning provides cooling when ambient temperature becomes too hot or the contents of the electrical enclosure generate heat that risk failure to components.
A tankless glue system pulls hot melt adhesive in solid state form from a storage container into a heat chamber where it is melted only when required. This reduces char and waste and eliminates the need to fill a melt tank that is extremely hot.
Adhesive fill systems monitor and maintain proper adhesive levels in hot melt glue system tanks. The sealed melter and auto-feed systems relieve machine operators from continuously refilling the tank.
Electrical enclosures located in cold and humid environments maintain better performance and longevity with the addition of this heater and drier package.
This machine can be modified to operate outside of standard specifications to accommodate smaller or larger dimension products and cases. Specific adjustments require engineering review to determine limitations and potential performance trade-offs such as machine speed or larger machine footprint.
A Network Address Translation device allows specific Ethernet network configurations across multiple machines in the plant network and offers the ability for remote support through VPN connections.
Easily move or reposition a machine on the production floor with the portability package, which provides locking casters and stabilizing jackscrew assemblies. Depending on machine model, it can also include quick disconnects for air lines and electrical lines.
